STANDARD DUTY CYLINDRICAL LOCKS GRADE 1 – X SERIES  X-DD-F DH US26D

• ANSI : Meets & Exceeds ANSI – A156.2, Series 4000, Grade 1 Standards
• UL Listings : UL Listed for “A” Label 3 Hour Fire Doors
• ADA Compliance : Meets ADA and ANSI A117.1 accessibility codes
• Lock Chassis : Steel, Zinc dichromated chassis for Corrosion Resistance
• Clutching : Clutching levers standard for Vandal resistance on locking functions
• Trim : 5″ Solid zinc diecast levers, 3 3/8″ wrought brass roses
• Lever Return : Anti-sag mechanism with independent lever return springs to prevent lever sag
• Handing : Non-Handed – Completely reversible (S-A & S-B lever styles are handed)
• Backset & Latchface : 2 3/4″ backset std. with 1 1/8″ x 2 1/4″ latchface, 2 3/8″ backset is available with 1″ x 2 1/4″ latchface both with self adjusting front for square or beveled edge doors
• Latchbolt : Stainless Steel Latch bolt with 1/2″ projection, Deadlocking on keyed functions & exit latch
• Cylinder Options : 6 Pin Brass Cylinder, C Kwy, with 2 Keys (standard), Prepared for Small format IC core (less core)
• Optional Keyways : 11 popular competitor keyways available with replacement cylinders (extra charge applies)
• Note: Replacement cylinders are supplied loose and not installed in locksets
• Strikes: 4 7/8″ x 1 1/4″ ASA standard – T strike & Full lip strikes available when specified
• Door Preparation : ANSI A115.2 – 2 1/8″ crossbore with (2) 3/8″ Thru bolt holes
• Door Thickness : Factory Set for 1 3/4″ Door thickness – 1 3/8″ require shims, can be adjusted to fit up to 2″ thick
• Standard Finishes :US26D
• Fasteners: Combination screws for wood or metal doors & frames
• Warranty :Limited Lifetime Warranty